Measurement and Testing
Portable Sulphur Analyser for Petroleum Fuels
Aug 06 2011
The SINDIE 7039 OTG analyser from MODCON (USA) is a dual use portable and bench-top sulfur analyser which uses XOS’s Monochromatic WD XRF technique per ASTM D 7039. The standard configuration for this analyser will measure sulphur concentrations from 1.0 ppm up to 10 wt%. Monochromatic Wavelength Dispersive XRF is a direct measurement technique which does not require sample conversion, consumable gases or elevated temperature operating conditions.
The analyser is designed for use in refinery labs, pipeline terminals, marine and on-board use, additive plants and general test vans and inspection laboratories. SINDIE OTG uses preassembled ACCU-CELL sample cups, designed to keep the sample and the cup free of external contamination and particles. ACCU-CELL cups eliminate the need for the user to put together the various separate film and cup components. The cups are pre-vented so there’s no need for the user to punch a hole in the sample cup. One standard 2 ml pipette will fill the cup and that’s it. Fast, clean and precise.
Digital Edition
PIN 25.2 Apr/May
May 2024
Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...
View all digital editions
Events
May 13 2024 New Orleans, LA, USA
May 14 2024 Tashkent, Uzbekistan
May 14 2024 Oklahoma City, OK, USA
May 15 2024 Lund, Sweden
May 15 2024 Copenhagen, Denmark