Sulphur analysis
Determination of Sulphur in ULSD, Biodiesel and Jet Fuel
Dec 04 2012
Petroleum fractions boiling in the range 150°C to around 350°C include jet fuel, kerosine and diesel fuel. These are commonly referred to as middle distillates and are often blended with cracked products from the hydrocracking and hydrogenation of heavy feedstocks.
This application note describes a direct injection technique for the routine analysis of sulphur content in common middle distillate fuels. A Thermo Scientific (USA) iPRO 5000 S Total Sulphur combustion analyser fitted with a Thermo Scientific jetPRO direct spray injector was used to measure the Total Sulphur (TS) content of three ASTM Crosscheck sample types - ultra low sulphur diesel (ULSD), biodiesel and jet fuel.
Download full application note: www.thermoscientific.com/ipro
Digital Edition
PIN 25.6 Buyers' Guide
January 2025
Buyers' Guide Directory - Product Listings by Category - Suppliers Listings (A-Z) Articles Analytical Instrumentation - ASTM D7042: The Quantum Leap in Viscosity Testing Technology -...
View all digital editions
Events
Feb 13 2025 Manama, Bahrain
Feb 17 2025 Cairo, Egypt
Feb 18 2025 Kuala Lumpur, Malaysia
Feb 25 2025 London. UK
SPS Smart Production Solutions Guangzhou
Feb 25 2025 Guanghzou, China