• C, N, S, Cl in One Single Analysis Cycle

Analytical Instrumentation

C, N, S, Cl in One Single Analysis Cycle

Feb 25 2010

With the EA® 5000 from Analytik Jena (Germany) The sulphur, nitrogen and carbon analysis is performed simultaneously and highly sensitively; after which, the chlorine content is automatically measured. This is the
first time that all four elements can be automatically identified in one single analysis cycle; however the instrument does not have to be converted for this purpose.

The multi EA® 5000 has a unique modular principle, which means that the system can be constructed individually. This allows you to configure your multi EA® 5000 to meet your needs and requirements; thus creating your personal analysis system. There is no problem if your analytical requirements change, since the modular structure of the multi EA® 5000 can be extended at any time.

The globally unique double furnace technology makes it quick to switch between vertical and horizontal applications in one instrument; i.e., fast and optimum adaptation to the sample matrix and analysis standard
with minimal effort. A single multipurpose combustion tube for both vertical and horizontal use in all standard applications limits the number of switching combustion tubes required.

The flame sensor technology guarantees matrix-optimised and quantitative combustion. Even unknown samples, whose properties are undocumented, can be analysed soot-free, precisely and reliably. Time-consuming
method generation and optimisation of process parameters, such as gas flow, temperature, dosing speed are now a thing of the past.

The Self Check System (SCS), unique multiWin® software and FAST (Fast, Safe and Tight) connection technology offer convenient operation and reliable measurement results. The multi-matrix sampler for vertical and horizontal applications saves valuable time, as there is no complex conversion, timeconsuming connection or adjustment of an additional sampler. The combustion system is unaffected.

Its features include application diversity; analysing solid, paste, fluid, gaseous and LPG samples along with its multi – element characteristic; having C, N, S and Cl determination all in one instrument. It is also a multimatrix sampler; for fully automated determination of solid and fluid samples in vertical or horizontal furnace configuration.In addition, it has double furnace technology; allowing optimal adaptation to the sample matrix and both a vertical and horizontal mode in a single instrument. Included is an extended measuring range with low maintenance, ultra-modern detectors, all the way from ppb to percent, and it has Modular design with the freedom to select and extend your analysis system configuration. It also has a self check system (SCS) for trouble-free operation and flame sensor technology for matrix-optimised sample digestion. Essentially, the multi EA® 5000 is a fast, safe and convenient analyser offering high precision.


Digital Edition

PIN 25.2 Apr/May

May 2024

Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...

View all digital editions

Events

Sensors Converge

Jun 24 2024 Santa Clara, CA, USA

The National Safety Show

Jun 25 2024 Auckland, New Zealand

East Russia Oil and Gas Forum

Jun 25 2024 Vladivostok, Russia

Power & Energy Africa 2024

Jun 26 2024 Nairobi, Kenya

Downstream 2024

Jun 26 2024 Galveston, TX, USA

View all events