• Flow control in industrial environments

Flow Level Pressure

Flow control in industrial environments

Dec 04 2018

In industrial applications, especially in the chemical, process and oil and gas industry, corrosion can be a real challenge. These types of industries are coping with demanding environmental and process conditions in production and operation. Prevention or control of corrosion by inhibiting often proves to be an economic solution.

A corrosion inhibitor system will add (inhibit) small concentrations of (bio)chemicals into the process. The effectiveness of an inhibitor system greatly depends on the correct injection amount, and can also be influenced by the environmental and process conditions; so accuracy is crucial here.

Using a low flow control system containing a Bronkhorst® mini CORI-FLOW mass flow meter can help you dose amounts of corrosion inhibitors more accurately. High accuracy and high turndown ratio is achieved based on pure mass measurement with this flow meter. It can directly control valves and pumps by on-board PID control and can be further optimized with PLC and HMI control extending both performance and flexibility.

Bronkhorst’s Coriolis dosing system approach enables real-time monitoring, control and logging of injection rates. This allows online checking of flow rates and instantaneous re-setting of the required flow rate. Asset management and preventive maintenance is supported with several active diagnostics.


Digital Edition

PIN 25.2 Apr/May

May 2024

Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...

View all digital editions

Events

Analiza

May 28 2024 Tel Aviv, Israel

CISILE 2024

May 29 2024 Beijing, China

KIOSH

May 29 2024 Astana, Kazakhstan

ASMS Conference

Jun 02 2024 Anaheim, CA, USA

MSS 2024

Jun 03 2024 Portoroz, Slovenia & online

View all events