Tube Deposit Rater for Rating Jet Fuel Thermal Oxidation Tubes is Now Part of ASTM D3241

The DR10 Tube Deposit Rater, from AD Systems (France), for rating Jet Fuel Thermal Oxidation Tubes has passed passed full D2 Committee Ballot and is now officially part of ASTM D3241, The Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels. The heater tube is prepared according to ASTM D3241 test procedure and is then placed in the test chamber of the DR10. Light is emitted and directed onto the surface of the heater tube. The reflected light is collected and the interference created by the deposit is monitored by the spectrometer. The software analyses the interference and calculates the deposit thickness. Precise thickness measurements are taken at 1,200 points along and around the tube surface. A detailed test report is ready in minutes. The report provides a 3-D profile of the deposit distribution on the tube surface. The software automatically detects and reports the Standard Spot Value, which is the mean deposit thickness of the thickest 2.5 mm2 area as defined in ASTM D3241. The average and the maximum thickness deposit values, as well as the calculated total deposit volume are reported. For complete test traceability, the DR10 report is tagged with the heater tube serial number picture taken by the built-in camera.