• The safe side of flash point testing

Analytical Instrumentation

The safe side of flash point testing

Apr 10 2019

With eralytics’ ERAFLASH flash point testers you can easily determine the flash point of your samples. More than 10 years industry experience as a renowned specialist of CCCFP flash point testing guarantees a solution for nearly every measuring task. Measuring with ERFLASH flash point testers gives equivalent results to ASTM D93 and even out performs it in terms of reproducibility.

Depending on your measuring task, there are various types of flash point testers available. From performing simple measuring routines sample after sample (ERAFLASH) to measure large numbers of samples with the 10-position autosampler ensuring high-throughput measurements (ERAFLASH S10) as well as a model for low-temperature flash point testing with accelerated cooling down to -40 °C (ERAFLASH LT). For ERAFLASH and ERAFLASH S10 there is also a high temperature extension available.

All types of ERAFLASH use the innovative inherently safe CCCFP – Continuously Closed Cup Flash Point Methods ASTM D6450 and D7094 with only 1-2 mL of sample volume. The closed chamber during the whole measurement process completely avoids the risk of any fire in the lab.

The very low sample volume (1-2 mL) makes ERAFLASH suitable for standard applications and also for special applications such as the measurement of valuable or hazardous samples. Depending on your industry you can easily measure a high number of different sample types from fuels, lube oils, paints, varnishes, solvents and many more.

Another great benefit is eralytics’ patented PBT – Peltier Boost TechnologyTM for maximum speed and range. With only one single device this innovative technology supports an unprecedented temperature range and allows significantly shorter turnaround times than all other flash point testers on the market.

In combination with its unrivaled temperature range of -25 to 420 °C (-13 to 788 °F) ERAFLASH is a very cost-efficient tool for big used oil testing facilities all the way to the food, flavor and fragrance industry.

With the 10-position autosampler ERAFLASH S10, eralytics provides the perfect solution for unattended flash point testing for high-throughput laboratories and offers even more operator comfort. The unique innovation for special applications is the optional cooling lid. The cooling lid keeps the pending sample cups in a pre-cooled state before the actual measurements. This results in shorter turnaround times and completely avoids the loss of volatile compounds.


Digital Edition

PIN 25.2 Apr/May

May 2024

Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector - Advancements and...

View all digital editions

Events

AIHA Connect 2024

May 20 2024 Columbus, OH, USA

MPGC

May 20 2024 Dubai, United Arab Emirates

HEFC 2024

May 23 2024 Beijing, China

NGVS 2024

May 23 2024 Beijing, China

Analiza

May 28 2024 Tel Aviv, Israel

View all events