Flow Level Pressure

  • Krohne Offers Solution for Accurate Bulk Measurement in the Oil and Gas Industry

Krohne Offers Solution for Accurate Bulk Measurement in the Oil and Gas Industry

Jun 18 2008 Read 1165 Times

KROHNE (Germany) has launched the Optimass 2000, a large diameter Coriolis mass flowmeter that offers a solution for accurate bulk measurement in the oil and gas industry.
The tried and tested twin straight tube design of the Optimass 1000, has been extended to provide accurate measurement for the bulk market. The Optimass 2000 is available in 3 sizes: DN100 (4”), DN150 (6”) and DN250 (10”). All wetted parts of the Optimass 2000 are manufactured from NACE compliant duplex Stainless Steel (ANS 31803) and the meter
is supplied with standard flanges up to 1500 lbs (12”).
PED approval offers process pressure capability up to 150 barg and the Optimass 2000 also offers flow rates from 7,000 Kg/h to 1,200,000 Kg/h, with a measuring accuracy of 0.1%. In addition, the stainless steel outer cylinder has a burst pressure in excess of 100 bar.
Aimed at the oil and gas industries, the low flow rate capability of the Optimass 2000 prevents the build up of static in hydrocarbons, whilst at the same time offering accurate measurement. The low flow rate capability is also a benefit for custody transfer applications.
The Optimass 2000 uses the successful MFC300 converter and is available as a compact or remote version. All signal processing is carried out
by the MFC300 which converts the meter output to a MODBUS RTU communications signal and the “split architecture” of the MFC300 allows dual redundancy of all calibration data. The meter can also be supplied with DDC (Direct Digital Communications) where the application doesn’t
require a converter.

Reader comments

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.

Post a Comment

Digital Edition

Petro Industry News November 2019

November 2019

In This Edition Fuel for Thought - Leading European sensor trade event taking place in 2020 already selling out fast - Endress+Hauser and Vector CAG secure contract at large Texas refinery...

View all digital editions


Saudi Plastics and Petrochem

Jan 13 2020 Riyadh, Saudi Arabia

IPTC 2020

Jan 13 2020 Dhahran, Saudi Arabia

National Biodiesel Conference & Expo 2020

Jan 20 2020 Tampa, FL, USA

SLAS 2020

Jan 25 2020 San Diego, CA, USA

European Gas Conference

Jan 28 2020 Vienna, Austria

View all events