• Inert Coatings for Substantially Improving Analytical Accuracy
  • SilcoNert-coated sample flow paths yield nearly-instant signal from instruments.
  • Dursan-coated sample cylinders retain almost 100% of H2S samples after three days. Uncoated cylinders consume nearly the entire sample within one day.

Environmental Laboratory

Inert Coatings for Substantially Improving Analytical Accuracy

May 11 2016

Measuring trace (ppm or lower) sulfur, mercury, and other emissions is both required by law and critical to productivity. SilcoNert®- and Dursan®- coated instruments produce virtually instant readings with superior accuracy because critical compounds don’t get adsorbed by stainless steel sample transfer equipment, an inevitable consequence of untreated metal.

Even electropolished flow paths take well over an hour to produce a signal without inert coatings. With them, analysts can start to see results within seconds of injecting the sample. This saves tremendous costs in the form of higher daily sample throughput, less labor, and compliance to environmental regulations.

The benefits of inert coatings aren’t just limited to better instrument performance. Collecting samples off-site once entailed a frantic race to the lab to test them before important molecules were scavenged by the metal sample storage vessels. With SilcoNert- and Dursan- coated sampling equipment, trace-level samples can be adequately maintained for as long as two weeks without loss.

SilcoTek coatings offer the chemical resistance/inertness of PTFE but dramatically improved durability, temperature resistance, and adhesion. A SilcoTek coating can be used at 450°C and sometimes greater, whereas PTFE is destroyed above 230°C. SilcoTek’s innovative chemical vapor-deposited (CVD) treatments are bound molecularly to the substrate so they won’t flake, even on tubing that is bent or flexed.

Trust SilcoNert and Dursan coatings for any analytical application:

  • Improve instrument performance and analytical accuracy
  • Fight corrosion
  • Reduce the impact of moisture in samples
  • Easily integrate coatings into existing or new systems – just send your parts to SilcoTek for service or contact an Approved Partner to purchase already-coated parts.

Want to learn more? Click here to view SilcoTek’s 'Improving Sampling Reliability and Corrosion Resistance' white paper or visit their website.


Digital Edition

AET 31.2 Buyers' Guide 2024

February 2024

In This Edition Buyer's Guide Directory - Product Listings by Category - Suppliers Listings (A-Z) Water / Wastewater - Methane Emissions Analysis at Berlin Wastewater Facility - Inter...

View all digital editions

Events

UzChemPlast Expo

Apr 03 2024 Tashkent, Uzbekistan

analytica 2024

Apr 09 2024 Munich, Germany

ChemBio Finland 2024

Apr 10 2024 Helsinki, Finland

View all events