Analytical Instrumentation

  • Density meter for heavy petroleum samples compliant with ASTM D4052 and ASTM D5002 - and new ASTM 8188

Density meter for heavy petroleum samples compliant with ASTM D4052 and ASTM D5002 - and new ASTM 8188

Nov 20 2018 Read 664 Times

Still measuring the density of your asphalt/bitumen with a pycnometer?

Does your daily measuring routine include time-consuming cleaning which needs a lot of solvent and time?

The solution is the DMA 4200 M - now with the new ASTM standard: ASTM D8188

Compliance with ASTM D4052 and ATM D5002

Due to the new and automatic bubble detection feature, FillingCheck™, DMA 4200 M is compliant with ASTM D4052 and ASTM D5002. The influence of viscosity is corrected faster and more accurately than ever before by a newly developed viscosity correction method.

New ASTM D8188 for asphalt

The new ASTM method is an alternative to the pycnometer method (ASTM D70). It makes the density measurement of asphalt, asphalt binder, and bitumen much faster and more accurate.

Constant temperature control from the syringe to the inlet and outlet of DMA 4200 M ensures highly fluid bitumen/asphalt or residual fuel oil when filling.

The benefits of the DMA 4200 M compared with the pycnometer are:

  • Saves time, solvent, and money:
  • Small sample volume of only 2 mL to 3 mL
  • 10 times faster than manual methods like pycnometers (ASTM D70)
  • Low solvent consumption for cleaning routines

The DMA 4200 M density meter will improve, simplify, and accelerate your density measurements bitumen/asphalt, crude oil, and LPG:

  • Provides compliant results for your petroleum samples:
  • New automatic bubble detection: FillingCheck™
  • ASTM D4052 and ASTM D5002 compliant
  • ASTM D8188 compliant
  • Fast new viscosity correction
  • New Temperfect™ feature - just fill sample and measure at any temperature between 0°C and 150°C at ambient pressure

The new density meter with the patented "Pulsed Excitation Method" for the most stable density results ever

For more information contact Anton Paar to see DMA 4200 M in action!

 

Read comments0

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.


Digital Edition

Petro Industry News March 2019

March 2019

In This Edition Fuel For Thought - Dr. Raj Shah presented with multifarious laurels - International partnership develops new real-time lubricant monitoring system - Ashtead Technology strik...

View all digital editions

Events

FORUMESURE

Mar 25 2019 Nantes, France

Americana

Mar 26 2019 Montreal, QB., Canada

Automaticon 2019

Mar 26 2019 Warsaw, Poland

SPE/ICoTA Well Intervention Conference and Exhibition

Mar 26 2019 The Woodlands, Tx, USA

Forum Labo Paris

Mar 26 2019 Paris, France

View all events