• New Wind Sensor for Extreme Applications

Air Monitoring

New Wind Sensor for Extreme Applications

Jul 21 2017

Since January 2016, the Norwegian airport systems integrator Avinor has tested a new Lufft wind sensor model with an enhanced heating power of 240W. Two of the new models are in the field, installed at the most extreme sites in Norway: One is placed at the top of Kjølen mountain, close to Tromsø Airport, at a height of 2,600ft. Here the average winter temperature is minus five degrees Celsius. The other one is mounted at the top of Rustadfjell mountain in a height of 1,100ft close to Bardufoss Airport. This site commonly experiences temperatures of minus ten degrees Celsius in January.

Both locations are very windy and experience numerous snow showers in winter. However, the two VENTUS-X models deliver reliable wind data ever since the installation: “The new sensors are much improved and stability is now as good as our users could wish,” confirmed Avinor system manager Sander Bjørn Hansen.

The successful test in Norway represents the starting point of the VENTUS-X product launch.

The robust and maintenance-free wind sensor is designed for professional meteorological applications in all climate zones. Therefore, besides airport applications, it’s especially suitable for meteorological services, marinas and ships. Moreover, it can be applied on wind turbines, traffic control systems, in avalanche as well as flood warning stations or as component of hydro-meteorological monitoring stations in general. The stainless housing makes it appropriate to be installed in coastal regions. This stability is owed both to the rugged housing as well to its sophisticated measurement principle.

VENTUS-X detects wind speed, wind direction, virtual temperature as well as barometric pressure. The ultrasonic wind sensor uses the run-time differential method for determining the wind speed and wind direction. It provides output for instantaneous values, vector and scalar means, the maximum gust of wind and wind direction, the maximum and minimum values and the virtual temperature.

Data output through serial or analogue interfaces provides compatibility of the Lufft VENTUS for commercially available hydro-meteorological dataloggers and PLC systems. Available interfaces SDI-12, RS-485, various RS-485-protocols as well as an analogue output.

An integrated, strong transducer heater keeps it free of ice even in extreme cold conditions. The closed metal housing provides a maintenance-free operation. Its casing material is also applied for ship propellers and proved itself as extremely rugged.

The VENTUS-X was successfully tested and certified for extreme ambient conditions: Official institutions, such as TÜV SÜD, verified it in terms of temperature, air humidity, electromagnetic compatibility, vibration, salt spray, icing and wind strengths.


Digital Edition

AET 31.2 Buyers' Guide 2024

February 2024

In This Edition Buyer's Guide Directory - Product Listings by Category - Suppliers Listings (A-Z) Water / Wastewater - Methane Emissions Analysis at Berlin Wastewater Facility - Inter...

View all digital editions

Events

UzChemPlast Expo

Apr 03 2024 Tashkent, Uzbekistan

analytica 2024

Apr 09 2024 Munich, Germany

ChemBio Finland 2024

Apr 10 2024 Helsinki, Finland

View all events