• A Grimy Overview of Mud Logging

Fuel for Thought

A Grimy Overview of Mud Logging

Aug 29 2014

Mud logging is the process of creating a detailed record or log of the materials which rise to the surface while drilling, and the subsequent analysis of this information. It takes its name from the fact that the most commonly-used medium for surrounding the drill during its operation is mud, though as time progresses this term is often seen as outdated.

Though mud is by far the most commonly-used substance, compressed air is sometimes used as a circulating medium instead. Therefore, an alternative and perhaps more accurate name for the practice is “surface-logging”, and those who carry out the procedure may be referred to as pore pressure engineers, logging geologists or engineers or formation evaluation engineers.

Mud logging is normally used when drilling for crude oil or petroleum, however it can also be employed when drilling water wells too.

What Are the Objectives of Mud Logging?

Primarily, mud logging strives to successfully identify potentially fruitful sites for drilling by seeking out hydrocarbon-rich formations. The data that is yielded by mud logging serves to successfully place, build and maintain the drill itself. Furthermore, perhaps the most important job of mud logging is to prevent catastrophe in the form of blowouts and explosions by monitoring the gas and pressure levels around the wellbore for safety.

What Do Mud Loggers Record?

Mud loggers will record all manner of data about the materials surrounding the drill, including:

  • Type of minerals and rocks present (lithology)
  • Permeability and porosity of the surrounding formation
  • Pore pressure of surrounding formation
  • Evaluation of hydrocarbons collected
  • Drilling rate
  • Flow-line temperature
  • Mud density and weight
  • Pump rate and pressure
  • Gas levels

All of this will be carefully recorded for future analysis. In the past, this would be done in a handwritten ledger, though these days the advance of technology has allowed for computer data input and storage.

How Do Mud Loggers Get Their Findings?

Mud loggers acquire this data from taking a number of “cutting” samples at various points of the area surrounding the wellbore, including the mud suction pit and the possum belly. These are taken at regular intervals – which is potentially very challenging if continuous drilling is required – and then subsequently analysed.

Gas and pressure levels are constantly monitored in order to attempt to prevent blowouts, as is the temperature of the mud itself. Of course, in order to achieve all of this data acquisition and analysis, sophisticated equipment is becoming increasingly important in the life of a mud logger.

The article, Thermal Mass Flow Meter Provides Precise Gas Measurement for Mud Logging Operations, looks at how a new meter is able to accurately assess gas levels around the drill head, thus minimising the risk of a blowout. Similarly, the Hydrocarbon Analyser for Mud Logging seeks to provide valuable data about the compositional makeup of the area surrounding the wellbore. 


Digital Edition

PIN 25.1 Feb/March

March 2024

In This Edition Safety - The technology behind the ION Science Tiger XT - Safety with ammonia and LOHCs as hydrogen carriers Analytical Instrumentation - Discussion on new tribology te...

View all digital editions

Events

UzChemPlast Expo

Apr 03 2024 Tashkent, Uzbekistan

ATYRAU Oil & Gas Kazakhstan

Apr 03 2024 Atyrau, Kazakhstan

analytica 2024

Apr 09 2024 Munich, Germany

ChemBio Finland 2024

Apr 10 2024 Helsinki, Finland

View all events