• Mind the Gap Between Kinematic Viscosity at -20 °C and the Freezing Point

Analytical Instrumentation

Mind the Gap Between Kinematic Viscosity at -20 °C and the Freezing Point

Nov 24 2015

Current aviation fuel specifications require a low-temperature viscosity measurement and a freezing point test to determine the safe operating zone of the product. But what really happens between -20°C and the freezing point? The viscosity undoubtedly increases, but does it increase beyond the safe operation limit of the aircraft?

Stabinger Viscometer: ASTM has released only one test method for jet fuel viscosity alternative to the original D445: that is D7042 “Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)”. In interlaboratory studies guided by ASTM, Anton Paar’s (Austria) Stabinger Viscometer has undergone the stringent testing required for aviation fuel certification for both the traditional petroleum-based jet fuels according to D1655 as well as for aviation turbine fuels containing synthesized hydrocarbons according to D7566.

In addition to the standard tests, the Stabinger Viscometer offers a new comprehensive performance test for jet fuels: a temperature scan over the entire relevant temperature range from -20 °C down to -56 °C, well below the freezing point requirement of aviation fuel A1. And best of all, this scan is fast: it only takes approximately the same time as a single conventional manual test at -20 °C and is fully automated.


Digital Edition

PIN 25.1 Feb/March

March 2024

In This Edition Safety - The technology behind the ION Science Tiger XT - Safety with ammonia and LOHCs as hydrogen carriers Analytical Instrumentation - Discussion on new tribology te...

View all digital editions

Events

UzChemPlast Expo

Apr 03 2024 Tashkent, Uzbekistan

ATYRAU Oil & Gas Kazakhstan

Apr 03 2024 Atyrau, Kazakhstan

analytica 2024

Apr 09 2024 Munich, Germany

ChemBio Finland 2024

Apr 10 2024 Helsinki, Finland

View all events