Environmental Laboratory

Detecting Heavy Metals in Soil using field portable x-ray fluorescence - Esa Nummi

Feb 16 2011

Author: Esa Nummi on behalf of Oxford Instruments (XRF, LIBS and OES)

Free to read

This article has been unlocked and is ready to read.

Download

Land contamination has become an increasingly high profile issue on the agenda of environmental and regeneration programmes, especially in Europe and in North America. One significant type of land contamination is pollution by heavy metals. Several incidents have attracted major media attention and as a result many enviromental programs have been initiated to address land contamination problems. Previously, the catastrophic consequences on human health and the environment by land contamination were not considered. Today with greater knowledge, land contamination is not seen as just a few isolated severe incidents, but as a widespread infrastructural problem of varying intensity and significance..

Heavy Elements
Heavy elements are normally considered as those with a density of 4 – 5 g/cm3 and higher. Based on this definition, all elements heavier than titanium (Ti) are heavy elements. However, normally only poisonous heavy elements are considered: arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), vanadinium (V), nickel (Ni), lead (Pb) and zinc (Zn). Some of the metals like Cu and Zn are poisonous only in high concentrations and they exist in normal, non contaminated soil. Most often, the heavy elements originate from previous use of the land by industry, for instance from waste burning plants, coal power plants, shooting tracks, mining, traffic and fertilizers. Heavy elements can cause harm both to human health and to the environment. Humans can be exposed to heavy elements by food plants, water and air, but animals and vegetation can also be adversely affected. In different countries there are determined accepted concentration levels (reference value, target value, guideline value, soil quality criteria…) for heavy elements. Levels are determined based on use of the land. A typical classification is for example: 1) play grounds, 2) residential areas, 3) parks, 4) industry areas. Concentration levels may vary significantly from one country to another.

Free to read

This article has been unlocked and is ready to read.

Download


Digital Edition

PIN 25.2 Apr/May

April 2024

In this Edition Safety - Carbon monoxide toxic and flammable gas detection Analytical Instrumentation - Density: A fundamental parameter at critical stages within the petroleum sector...

View all digital editions

Events

SETAC Europe

May 05 2024 Seville, Spain

Saudi Plastics and Petrochem

May 06 2024 Riyadh, Saudi Arabia

OTC 2024

May 06 2024 Houston, Tx, USA

ILTA 2024

May 06 2024 Houston, Tx, USA

Canada Gas & LNG Exhibition & Conference

May 07 2024 Vancouver, BC, Canada

View all events